SURFACING & WIDEBELT SANDING
Capable of processing live edge slabs, tabletop glue-ups, and resin casted tables up to 6 feet wide and 16 feet long. Material is flattened and sanded to 80 grit on each face.
Minimum length = 18 inches
Maximum Length = 192 inches
Maximum Width = 72 inches (Surfacing) / 48 inches (Sanding)
Maximum Thickness = 6 inches
• All material must be kiln-dried and measure 15% MC or less.
• Three square feet minimum charge per piece of material.
SURFACING & SANDING RATES
LIVE EDGE SLABS AND TABLETOP GLUE-UPS
Width 2ft. or less (Surface and Sand) - $12/sq. ft.
Width 4ft. or less (Surface and Sand) - $15/sq. ft.
Width 6ft. or less (Surface Only) - $15/sq. ft.
END-GRAIN CROSS-CUTS
Diameter 4ft. or less (Surface and Sand) - $20/sq. ft.
Diameter 6ft. or less (Surface Only) - $20/sq. ft.
RESIN CASTS
Width 4ft. or less (Surface and Sand) - $15/sq. ft.
Width 6ft. or less (Surface Only) - $15/sq. ft.
SANDING
4ft. or less (Material must be flat with no glue, no hardware, no finish) - $6/sq. ft.
Rates are based on the square feet of ONLY the top face. Rates include processing of both top and bottom faces.